skip to Main Content
Fitness, Recreation, Playground and Flooring | Installation, Service and Maintenance | Over 40 Years Experience
(718) 436-4693

Poured-In-Place

SKU: PIP Category:

Description

Poured-in-place surfacing is made from recycled rubber and mixed with a polyurethane binder. It is a 2-layer product, which is poured and troweled at the site to accommodate any design or configuration. The base is referred to as the “resilient” layer and the top is the “wear” layer. The top is significantly higher in density in order to withstand continuous play activity.

  • The top wear layer is available in various levels of strength and density which can significantly increase the life expectancy of the surfacing.
  • Overall thicknesses are available from 1½” to 4½” to meet specific fall heights.
  • More than a dozen color options are available. Additional customization is available as well.
  • Material is porous and typically used outdoors.
  • Five year warrantee
  • Recommended base options: (in order of recommendation)
    • Concrete or
    • Asphalt or
    • Crushed stone

{tab=Solid Colors }

flooring-colors-solid

{tab=Blended Colors }

flooring-colors-blended

{tab=EPDM Colors }

flooring-colors-epdm

{/tabs}

Warning: Many surfaces such as asphalt, sand, metal, plastic or rubber surfacing will get hot from direct sunlight. It is strongly recommended to wear shoes when walking on rubber surfacing, regardless of specific type of surface.

Back To Top